PERSONAL SPECIFICATIONS/個人能力描述
1. Full-time University graduate, major in mechanical engineering or related engineering graduate.全日制大學學歷，機械工程或相關類似專業
2. 4+ years working experience in quality management, familiar with the ISO9001/TS****** quality system. Supplier experience of General Motors, VW, SAIC, Toyota, Honda and etc. is preferential.4年以上質量管理經驗，熟悉ISO9001/TS******質量體系。有GM,VW,SAIC,TOYOTA,HONDA等整車廠下游廠家經驗者尤佳
3. Familiar with quality tools such as APQP/PPAP/FMEA/SPC/MSA.。熟悉質量工具APQP/PPAP/SPC/FMEA/MSA等的使用
4. Understanding use method of measuring instruments and equipment for plastic and metal parts, such as projectors or image measuring machine, tensile testing machine, temperature and humidity test chamber, high-low temperature test chamber, salt spray test machine and so on.熟悉使用五金及塑膠產品常用檢測設備儀器，如：投影機，2.5次元，拉力計，溫濕度儀，高低溫測試機，鹽霧測試機等
5. Basic knowledge of plastics products, skillful at engineering drawings. 對塑膠產品有基礎知識，對工程圖紙非常熟悉
6. With good team work and communication skills, able to withstand the strong pressure of work. 良好的團隊合作精神及溝通能力，能在壓力下工作
7. Good Office software using and English writing skills.能熟練使用辦公軟件，英語要求能書面交流
DUTIES & RESPONSIBILITIES/任務和職責
1. To participate in the new project development, responsible for the preparation of test plans, PFMEA, control plans, inspection instruction file, track the development progress, review of key nodes involved in the project.參與新項目開發，負責準備測試計劃，PFMEA，控制計劃，檢查指引文件等，跟蹤項目開發進度，審核項目關鍵節點
2. Be responsible for new development or validation of samples of engineering change projects, and prepare related reports. Design and verify production testing fixture and JIG.負責工程更改項目的新樣品的開發與確認，相關報告的準備，工裝夾具治具的設計確認等
3. Summary PPAP documents and submit to the customer for approval and to track approval status. 準備PPAP文件，向客戶提交批準申請，跟進批準進度
4. Maintain good communication with the customer; general and deep understanding of customer requirements, timely resolution of customer complaints; prepare 8D reports and visit to customer if necessary.保持與客戶良好溝通，全面深刻了解客戶要求，及時處理客戶投訴，8D 報告準備，有需要時拜訪客戶以尋求問題有效解決
5. Preparing and updating of site inspection instructions, training inspectors, continue to improve and streamline the testing process.現場檢查指引的準備與更新，培訓檢查員，持續提升及完善檢查測試流程
6. Participate in on-site analysis and handle of quality problem, statistical analysis of qualitative data and quality improvement projects.參與現場質量問題的分析解決，對質量數據及改善項目進行統計分析等
7. Participate in supplier quality control and management for raw materials and outsourcing parts.對委外產品及材料的供應商的質量進行管理及控制
8. Assist in quality and EHS system audit, process audits, product audits, submit reports on time.協助質量及EHS方面的系統審核，過程審核，產品審核等，準時提交相關報告
9. The other working from Supervisor.主管安排的其他工作
注：有汽車行業T1質量工程師經驗
1. Full-time University graduate, major in mechanical engineering or related engineering graduate.全日制大學學歷，機械工程或相關類似專業
2. 4+ years working experience in quality management, familiar with the ISO9001/TS****** quality system. Supplier experience of General Motors, VW, SAIC, Toyota, Honda and etc. is preferential.4年以上質量管理經驗，熟悉ISO9001/TS******質量體系。有GM,VW,SAIC,TOYOTA,HONDA等整車廠下游廠家經驗者尤佳
3. Familiar with quality tools such as APQP/PPAP/FMEA/SPC/MSA.。熟悉質量工具APQP/PPAP/SPC/FMEA/MSA等的使用
4. Understanding use method of measuring instruments and equipment for plastic and metal parts, such as projectors or image measuring machine, tensile testing machine, temperature and humidity test chamber, high-low temperature test chamber, salt spray test machine and so on.熟悉使用五金及塑膠產品常用檢測設備儀器，如：投影機，2.5次元，拉力計，溫濕度儀，高低溫測試機，鹽霧測試機等
5. Basic knowledge of plastics products, skillful at engineering drawings. 對塑膠產品有基礎知識，對工程圖紙非常熟悉
6. With good team work and communication skills, able to withstand the strong pressure of work. 良好的團隊合作精神及溝通能力，能在壓力下工作
7. Good Office software using and English writing skills.能熟練使用辦公軟件，英語要求能書面交流
DUTIES & RESPONSIBILITIES/任務和職責
1. To participate in the new project development, responsible for the preparation of test plans, PFMEA, control plans, inspection instruction file, track the development progress, review of key nodes involved in the project.參與新項目開發，負責準備測試計劃，PFMEA，控制計劃，檢查指引文件等，跟蹤項目開發進度，審核項目關鍵節點
2. Be responsible for new development or validation of samples of engineering change projects, and prepare related reports. Design and verify production testing fixture and JIG.負責工程更改項目的新樣品的開發與確認，相關報告的準備，工裝夾具治具的設計確認等
3. Summary PPAP documents and submit to the customer for approval and to track approval status. 準備PPAP文件，向客戶提交批準申請，跟進批準進度
4. Maintain good communication with the customer; general and deep understanding of customer requirements, timely resolution of customer complaints; prepare 8D reports and visit to customer if necessary.保持與客戶良好溝通，全面深刻了解客戶要求，及時處理客戶投訴，8D 報告準備，有需要時拜訪客戶以尋求問題有效解決
5. Preparing and updating of site inspection instructions, training inspectors, continue to improve and streamline the testing process.現場檢查指引的準備與更新，培訓檢查員，持續提升及完善檢查測試流程
6. Participate in on-site analysis and handle of quality problem, statistical analysis of qualitative data and quality improvement projects.參與現場質量問題的分析解決，對質量數據及改善項目進行統計分析等
7. Participate in supplier quality control and management for raw materials and outsourcing parts.對委外產品及材料的供應商的質量進行管理及控制
8. Assist in quality and EHS system audit, process audits, product audits, submit reports on time.協助質量及EHS方面的系統審核，過程審核，產品審核等，準時提交相關報告
9. The other working from Supervisor.主管安排的其他工作
注：有汽車行業T1質量工程師經驗
職位類別： 品質工程師(QA/QC工程師)
舉報溫馨提示
- 你可能感興趣的職位
- 最近瀏覽記錄
-
5-10K/月
-
5-7K/月
-
面議
-
面議
-
5-6K/月
-
面議
-
8-9.9K/月
-
6-7.9K/月
暫沒有相關信息
- 公司性質：有限公司
- 所屬行業：零部件
- 所在地區：上海
- 聯系人：人事部
- 手機：會員登錄后才可查看
- 郵箱：會員登錄后才可查看
- 郵政編碼：201807
工作地址
- 地址：嘉定區嘉唐路488#
